Points Per Hour or QSOs Per Hour: Which Rate to Watch

16. november 20268 min lugemistContest statistics
Points Per Hour or QSOs Per Hour: Which Rate to Watch

Short answer: QSOs per hour is the rate that every logger shows and every contester knows, but it treats every QSO as equal. In contests where QSOs have different values, or where multipliers decide the score, points per hour or a combined measure can tell you more. Watch both: QSOs per hour to see how fast you work, and points and new multipliers per hour to see how well the time is spent. The rules of each contest define the points, so check them.

Two rates, two questions

QSOs per hour answers the question “How fast am I working?” It is simple, easy to measure, and immediately visible on the screen during the contest. It is the right measure of the speed of your operation: the quality of your run, the efficiency of your messages and the activity on the band.

Points per hour answers a different question: “How much is each hour worth?” In a contest where a QSO with another continent is worth more than a QSO within your own country, a lower number of QSOs with higher value can produce a better score than a high rate of low-value QSOs. And in contests where multipliers matter much, an hour that brings ten new multipliers may be better than one that brings sixty ordinary QSOs. Neither of the two measures is wrong; they simply answer different questions.

When QSOs per hour is enough

In contests where every QSO has the same value and the multiplier structure is simple, QSOs per hour is a good indicator, and it is the number that most closely follows the score. Even then, however, it does not tell you whether the QSOs are dupes or not. A fast run with many dupes looks excellent on the rate meter, but it earns nothing. The article on the rate meter during a contest explains what the displayed numbers include, and the one on dupes in contest logs shows why a rate of valid QSOs is more useful.

QSOs per hour is also the right measure for comparing run and search-and-pounce periods. The difference between them tells you where your time is better spent, as discussed in run versus search and pounce.

When points per hour matters more

Points per hour matters where QSO values differ. Contests that award points by distance, continent or band make some QSOs more valuable than others, and an hour in which you worked many close stations gives fewer points than an hour in which you worked a few distant ones. If you look only at QSOs per hour, you will credit the first hour with a good rate and miss the fact that the second hour brought more points. The article on QSO points in CQ WW shows an example of how points depend on the type of QSO.

Check the current official rules for the value of each type of QSO, then calculate the average points per QSO in your log. If it is much lower than the best possible, you may be working too many near stations; if it is high, you are probably already working the valuable ones. Remember that you often cannot choose: the stations that call you determine what you work.

The multiplier hour

In many contests the real difference between a good and a very good score is made by the multipliers. An hour in which you find a dozen new multipliers may have only a modest QSO rate. If you judge the hour by its QSO count, you will think it was poor. If you judge it by the multipliers or by the share of the final score that it created, you will see its value.

A simple way to see this is to compute a measure that combines the two. For example, for each hour count the QSO points and the new multipliers, and calculate how much each hour added to the final score by multiplying the new multipliers by the total QSO points, and the new QSO points by the final multiplier count. The exact method is up to you; the idea is that early multipliers are worth more than late ones, because they multiply more QSO points. See multipliers per hour and early versus late multipliers.

Reading both in your hourly statistics

After the contest, put the two rates side by side for each hour. Look for hours in which they diverge. A high QSO rate with low points suggests a run of low-value QSOs. A low QSO rate with high points or many new multipliers suggests an effective search. Both patterns are valuable information, and neither is simply good or bad.

A Contest Analyzer report provides rates, QSOs by hour and band, countries, continents, CQ and ITU zones and WPX prefixes, so you can see what kind of QSOs each hour contained. Its check of every callsign and every zone against official license databases and several independent reference sources adds a view of quality: it shows the few QSOs worth a second look. Combine the views: speed, value and quality. The contests page lists the supported contests, and year-on-year comparison with your own logs shows how each measure changes over time.

A worked example

Imagine two hours from a log. In hour A you made 110 QSOs, mostly with stations on the same continent, with a low average value per QSO and two new multipliers. In hour B you made 55 QSOs with distant stations, with a higher average value and nine new multipliers. On the rate meter, hour A is twice as good. On points, the difference is smaller. On new multipliers, hour B is far better. If the contest score is the total of QSO points multiplied by the multiplier count, the contribution of the two hours depends on when in the contest they occur, and on how many multipliers you already have.

The conclusion is not that fast running is bad. It is that a good contest uses both kinds of hours in the right places: runs when the band is full of stations to work, and searches when new multipliers are available. The numbers help you see whether you balanced them. The numbers in the example are imaginary and serve only as an illustration.

What to put on the screen during the contest

During the contest you need simple, fast information. QSOs per hour over the last ten minutes and over the last hour are the standard. If your logger can show points per hour, add it. A counter of new multipliers in the last hour is also valuable. Avoid cluttering the screen with too many figures. Choose two or three that will change your decisions: if the rate falls, you consider a different band; if new multipliers have not appeared for an hour, you consider searching.

The article on the QSO rate by band and hour heatmap shows how a visual display of the rate by band can guide decisions after the contest, and the same idea works during the contest with a small window.

Making your own simple sheet

If your logger does not show these figures, a small sheet will do. After the contest, export your QSOs to a table, add a column for the hour and count the QSOs per hour. Add a second column with the points of each QSO according to the rules, and a third column that marks the first QSO with each new multiplier. Then use a pivot or a simple formula to sum each column per hour. In half an hour you have three curves: QSOs per hour, points per hour and new multipliers per hour. Plot them on one chart, with the same horizontal axis, and look at the shapes.

You will often find that the curves do not move together. The QSO curve is high in the first hours of a band opening, the points curve follows with a delay if the stations are distant, and the multiplier curve has peaks at the moments when you changed bands or searched. These are your decisions in graphical form. The next time, you can plan around them: be on the band at the moment when the multiplier curve would rise, and run when the QSO curve is high. A report from a service can show part of this picture, but the habit of looking at several curves at once is the real skill.

Common mistakes

The first mistake is to chase the rate meter. A high number feels good, but it does not always earn points, and dupes may be counted. The second is to ignore the rate after the contest and to look only at the final score; the hourly view tells you more about what to change. The third is to compare rates between contests with different point systems. A rate of 100 QSOs per hour means different things in different events. Compare like with like, in the same contest and category. The fourth is to forget the errors: a high rate with many busted calls is not a high rate of valid QSOs, and the corrected log may show a lower real figure.

Related reading

The bottom line

QSOs per hour tells you how fast you work; points and new multipliers per hour tell you how well the time was used. Watch both, read them side by side in your hourly statistics, and take the definition of points from the current rules of each contest.

FAQ

Does my logger show points per hour?

Many loggers do, with settings that depend on the contest. Check your logger’s score window or reports.

Are dupes included in QSOs per hour?

Often yes, in the raw count. A valid-QSO rate is more useful. Dupes are not errors, but they earn nothing in most contests.

Which rate should I use to set goals?

Use QSOs per hour for speed goals and points or multipliers for result goals.

Can I compare my rate with another station?

Only roughly, and only in the same contest and category. Conditions and stations differ.

#Contest Statistics#Multipliers#QSO Points#Rate Meter#Rates
Check your contest log before you submit it.Kontrolli. Analüüsi. Paranda oma võistluslogi igal aastal.
Alusta kontrolli

More from the blog

Kõik artiklid →
Veel LY4A-lt · tasuta

Ära jäta ootatud DX-i kunagi vahele.

LY4A DX Reminder. Ütle, millist kutsungit, millistel sagedusaladel ja millises tööliigis sa ootad. Rakendus jälgib taustal viit DX-klastrit ja annab tõelise häire kohe, kui see kutsung ilmub — ka siis, kui telefon on hääletu.

  • Tasuta — ilma reklaamide ja kontota
  • DXScape, DXSummit, DXHeat, PSK Reporter, RBN
  • 160 m kuni 70 cm · CW, SSB, FT8, FT4, RTTY
  • iPhone, Android, Windows ja Mac

ly4a.com ↗

Sama meeskonna tehtud

Veel tööriistu meie meeskonnalt

Loonud Internet Solutions. Igaüks säästab su aega eri moel.